Measurement of tongue–artificial nipple contact pressure during infant sucking

To clarify the motor function of the infant tongue during sucking, we developed an artificial nipple that contained multiple small built‐in force sensors integrated with a PC‐based system which is capable of measuring tongue–artificial nipple contact pressures in real time. The force sensor is a cantilever structure with a small, thin stainless steel beam where an all‐purpose foil strain gauge is attached to the surface of the beam. An artificial nipple made of an elastomer containing these sensors is connected through an amplifier and an A/D converter to a PC via a USB port. Using this system, measurements were taken in three infants whose oral feeding was well established and in one infant of low birth weight. The results from each force sensor showed a pressure waveform of a nearly simple harmonic motion that indicated a peristalsis‐like movement of the tongue; the sucking frequency was found to be about two times per second. In addition, in the low‐birth‐weight infant, the pressure changed as the infant grew. © 2012 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Ultra high-efficiency multi-photon emission blue phosphorescent OLEDs with external quantum efficiency exceeding 40%

We developed high-efficiency multi-photon emission (MPE) blue phosphorescent OLEDs with external quantum efficiency exceeding 40% at 100 cd m⁻². In these MPE devices, we used a blue phosphorescent emitter, FIrpic and pyridine-containing electron-transporters, B3PyPB and B3PyMPM, B4PyMPM. We also used a well-known electron-transporter, BCP for comparison. We used a combination of TAPC/MoO₃/Al/Liq layers as the charge-generation layer unit. An optimized MPE device showed an extremely high current efficiency of over 90 cd A⁻¹ and a high power efficiency of over 40 lm W⁻¹ at 100 cd m⁻² without any outcoupling enhancement.     

Study on Model Predictive Control to Minimize Movements in Positions Due to Thermal Expansion of Plate with Varying Generation of Heat

Precise temperature control to decrease movements in positions due to thermal expansion of work pieces is required in the manufacturing processes to achieve nanometer-order accuracy. We analytically examined the effect of a method of minimizing movements in positions on a plate with varying generation of noise-heat. Control by monitoring temperature changes caused larger movements in positions than that without control because maximum change in temperature occurred at non-monitoring positions. The best method of minimizing movements in positions due to thermal expansion of a plate with varying generation of noise-heat was model predictive control by the monitoring movements and distributed temperature changes in the control heater according to the effects of the generation of noise-heat. The maximum movement in positions was 6 nm, which was 1/4 times of that without control.     

Evolving graph‐based chromosome by means of variable size genetic network programming with binomial distribution

Genetic network programming (GNP) is a graph‐based evolutionary algorithm with fixed size, which has been proven to solve complicated problems efficiently and effectively. In this paper, variable size genetic network programming (GNPvs) with binomial distribution has been proposed, which will change the size of the individuals and obtain their optimal size during evolution. The proposed method will select the number of nodes to move from one parent GNP to another parent GNP during crossover to implement the new feature of GNP. The probability of selecting the number of nodes to move satisfies a binomial distribution. The proposed method can keep the effectiveness of crossover, improve the performance of GNP, and find the optimal size of the individuals. The well‐known testbed Tileworld is used to show the numerical results in the simulations. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

An extended probabilistic model building genetic network programming using both of good and bad individuals

Classical estimation of distribution algorithms (EDAs) generally use truncation selection to estimate the distribution of the good individuals while ignoring the bad ones. However, various researches in evolutionary algorithms (EAs) have reported that the bad individuals may affect and help solving the problem. This paper proposes a new method to use the bad individuals by studying the substructures rather than the entire individual structures to solve reinforcement learning (RL) problems, which generally factorize their entire solutions to the sequences of state–action pairs. This work was studied in a recent graph‐based EDA named probabilistic model building genetic network programming (PMBGNP), which could solve RL problems successfully, to propose an extended PMBGNP. The effectiveness of this work is verified in an RL problem, namely robot control. Compared to other related work, results show that the proposed method can significantly speed up the evolution efficiency. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Study on Specific Heat of Water Adsorbed in Zeolite Using DSC

In this study, the specific heat of water included in an adsorbent was analyzed by a differential scanning calorimeter in the temperature range from ?50 °C to 50 °C. Zeolites with pore sizes of 3 Å and 9 Å were employed as adsorbents, and the measurement was performed with various water mass fractions in zeolites. In this article, the water was defined as being composed of adsorbed water and free water that is not adsorbed in zeolite. As a result, the specific heat of the dry zeolite increased with temperature. The specific heat of the adsorbed water was measured by a special experimental procedure to establish the experimental accuracy. It was found that the specific heat of the adsorbed water had values in the range from (3 to 5) J · g^?1 · K^?1.     

Crack detection and sizing technique by ultrasonic and electromagnetic methods

Improvements in defect detection and sizing capabilities for non-destructive inspection techniques have been required in order to ensure the reliable operation and life extension of nuclear power plants. For the volumetric inspection, the phased array UT technique has superior capabilities for beam steering and focusing to objective regions, and real-time B-scan imaging without mechanical scanning. In contrast to the conventional UT method, high-speed inspection is realized by the unique feature of the phased array technique. A 256-channel array system has developed for the inspection of weldment of BWR internal components such as core shrouds. The TOFD crack sizing technique also can be applied using this system. For the surface inspection, potential drop techniques and eddy current techniques have been improved, which combined the theoretical analysis. These techniques have the crack sizing capability for surface breaking cracks to which UT method is difficult to apply. This paper provides the recent progress of these phased array and electromagnetic inspection techniques.     

Development and evaluation of a certificate validation system in mobile environments

We have developed a public key certificate validation system considering the restrictions peculiar to the mobile environment, such as processing the speed and memory capacity of a cellular‐phone terminal, and the network transmission speed. In this paper we derive a theoretical formula showing the performance of a validity check of the public key certificate of the conventional system and of the proposed system, and compare and examine a theoretical value in a mobile environment. Moreover, we evaluate the actual measurement that uses the server and cellular‐phone terminal that we developed. We show that our proposed system based on the certificate validation server (CVS) system is better than the conventional system from the viewpoint of processing speed and transmission speed. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Experimental evaluation of electrode conversion efficiency of alkali metal thermal to electric converter

The alkali metal thermal to electric converter (AMTEC) system which utilizes the sodium ion conductivity of a beta″‐alumina solid electrolyte (BASE) is expected to have high conversion efficiency above 30% including practical heat losses. However, the achieved experimental efficiencies have been around 15%. In this paper, current–voltage characteristics and heat and mass transfer processes on a single cell have been examined experimentally and thermal electrode conversion efficiency has been discussed. Measured electrode conversion efficiency without thermal losses showed that it was about 40% at a power density of 0.3 W/cm². A theoretical analysis on the thermal losses has also been conducted and these losses are estimated to be 0.3 W/cm² in a practical tube type cell, so that an actual cell system efficiency of 30% is expected. © 2001 Scripta Technica, Heat Trans Asian Res, 30(3): 234–244, 2001